APPLICATION
APPLICATION

Robotic Painting, Spraying & Coating Automation Systems

Dade Heavy Industry supplies complete robotic painting, spraying, and coating automation systems for automotive bodies, aerospace components, appliance housings, and industrial parts. Explosion-proof 6-axis robots (Kawasaki KJ series, Fanuc Paint Mate, ABB IRB 5000, Yaskawa MPX) with electrostatic rotary bells, airless/HVLP guns, automatic colour change (2–12 colours), and VOC abatement systems. Applications: automotive bodies, aircraft parts, appliance housings, wind turbine blades, pipe coating. ATEX/NFPA 33 compliant. 300+ paint cells delivered globally.

Explosion-proof robots (ATEX/NFPA 33) · Electrostatic/airless/HVLP · 2–12 colour change · VOC abatement · 300+ paint cells

Painting & Coating Applications by Industry

Automotive Body & Parts

Body-in-white prime/base/clear, bumper fascia, mirror housings, wheel coating. 4–12 colour change. Electrostatic rotary bell + HVLP touch-up. 100% transfer efficiency target.

Aerospace Components

Fuselage panels, wing skins, landing gear, engine nacelles. Low-pressure HVLP for primers/topcoats. NESHAP compliant. Traceability & data logging per AS9100.

Appliance & Consumer Goods

Refrigerator panels, washer drums, microwave cavities, cookware. High-speed colour change (2–4 colours). Water-based & powder coating options. Compact cells.

Wind Turbine Blades

Leading edge protection, root/ tip coatings, tip cap. Large 6-axis + 7th axis track (15–20 m). Gelcoat, polyurethane, epoxy. Offshore UV/erosion protection.

Pipe & Tank Coating

Internal/external pipe coating (FBE, epoxy, PU), tank linings, offshore risers. 6-axis + rotational positioner. Holiday detection integration. NACE/ISO 12944 compliant.

General Industrial & Metal Fabrication

Structural steel, enclosures, cabinets, frames, agricultural/construction equipment. Airless/air-assisted airless. High transfer efficiency. Batch & continuous flow.

Spray Technology Selection Guide

Choosing the right atomization technology depends on coating type, substrate, transfer efficiency targets, and regulatory requirements. Dade integrates all major technologies.

Spray Technology Comparison
Technology Principle Transfer Efficiency Best For Typical Coatings
Electrostatic Rotary Bell Centrifugal atomization + electrostatic charge 85–95% Automotive topcoats, clearcoats, high-gloss Solvent/water-based basecoat, clearcoat
Electrostatic Airless High-pressure fluid + electrostatic charge 70–85% High-viscosity, high-build, primers Epoxy primers, zinc-rich, thick films
HVLP (High Volume Low Pressure) Low pressure (0.1–0.7 bar) high volume air 65–75% Aerospace primers/topcoats, low VOC Water-based, low-VOC, aerospace primers
Airless High pressure (100–300 bar) no air 50–65% Heavy industrial, thick films, zinc-rich Epoxy, polyurethane, zinc-rich, FBE
Air-Assisted Airless Airless + low-pressure air assist 60–75% General industrial, better finish than airless Enamels, urethanes, epoxies
Electrostatic Disc Centrifugal disc + electrostatic 80–90% Small parts, high speed, flat parts Water-based, UV coatings

Explosion-Proof Robot Selection

Dade supplies ATEX Zone 1 / Class I Division 1 certified explosion-proof robots from all major brands. Selection based on payload, reach, wrist hollow (for hose routing), and local certification requirements.

Explosion-Proof Painting Robot Models
Robot Model Payload Reach Certification Wrist Hollow Best For
Kawasaki KJ314 14 kg 1,850 mm ATEX Zone 1 / Class I Div 1 Yes (70 mm) Automotive body, general parts
Kawasaki KJ264 15 kg 1,700 mm ATEX Zone 1 / Class I Div 1 Yes (70 mm) Automotive parts, medium parts
Fanuc P-250iA 15 kg 1,670 mm ATEX Zone 1 / Class I Div 1 Yes (70 mm) Automotive, aerospace, general
Fanuc Paint Mate 200iA 5 kg 988 mm ATEX Zone 1 / Class I Div 1 Yes (50 mm) Small parts, interior, trim
ABB IRB 5500-22 12 kg 2,200 mm ATEX Zone 1 / Class I Div 1 Yes (70 mm) Large parts, aerospace, wind blades
ABB IRB 5400 15 kg 1,600 mm ATEX Zone 1 / Class I Div 1 Yes (70 mm) Automotive, general industrial
Yaskawa MPX3500 35 kg 2,500 mm ATEX Zone 1 / Class I Div 1 Yes (80 mm) Heavy parts, wind blades, large struct

Automatic Colour Change Systems

Dade integrates Graco, Graco ProMix, Ransburg, and Nordson automatic colour change (ACC) systems. 2–12 colour capability with <30 sec changeover. Solvent/water-based compatible. Closed-loop flush with solvent recovery.

Colour Change Performance

Automatic Colour Change Performance
System Colours Changeover Time Flush Volume Best For
Graco ProMix PD2K 2–8 <30 sec <50 ml 2K polyurethane, automotive
Graco ProMix PD1K 2–12 <30 sec <30 ml 1K water/solvent, multi-colour
Ransburg RCC 4–12 <45 sec <60 ml High-volume automotive
Nordson VersaCoat 2–8 <40 sec <40 ml Water-based, low VOC

VOC Abatement & Environmental Compliance

Dade integrates Regenerative Thermal Oxidizers (RTO), Recuperative Thermal Oxidizers, Carbon Adsorption, and Zeolite Concentrators for VOC destruction. Systems sized for booth exhaust volume (5,000–100,000 m³/hr). Heat recovery >95% (RTO). Compliance with EPA NESHAP, EU Industrial Emissions Directive, China GB 38507.

VOC Abatement Technology Comparison
Technology Destruction Efficiency Exhaust Volume Heat Recovery Best For
Regenerative Thermal Oxidizer (RTO) 99%+ 10,000–100,000 m³/h 95–97% High volume, continuous ops
Recuperative Thermal Oxidizer 99%+ 5,000–30,000 m³/h 70–75% Medium volume, lower capex
Zeolite Concentrator + RTO 95–99% 20,000–200,000 m³/h 95%+ Very high volume, low VOC conc.
Carbon Adsorption + Steam Regen 90–95% 5,000–50,000 m³/h N/A Batch ops, low concentration

Frequently Asked Questions

What spray technology should I choose for my application?

Electrostatic rotary bell: Best for automotive topcoats/clearcoats — highest transfer efficiency (85–95%), finest finish. HVLP: Mandatory for aerospace (NESHAP), low-VOC water-based, best for thin films on aluminium/composites. Airless: Heavy industrial, zinc-rich primers, thick films, pipe coating. Air-assisted airless: General industrial compromise. Dade engineers select based on your coating, substrate, volume, and regulations.

Are your robots certified for explosion-proof environments?

Yes. All painting robots supplied by Dade are ATEX Zone 1 (Ex db IIB T4) and/or Class I Division 1 (Class I, Div 1, Groups C/D) certified. Models include Kawasaki KJ series, Fanuc P/Paint Mate, ABB IRB 5400/5500, Yaskawa MPX. Certificates provided with shipment. Local certification (CNEx, KCs, INMETRO) available on request.

How many colours can your automatic colour change systems handle?

Standard systems: 2–8 colours (Graco ProMix, Nordson). High-volume automotive: 4–12 colours (Ransburg RCC). Changeover time <30 seconds for most systems. Flush volume 30–60 ml per change. Closed-loop solvent recovery reduces waste by 60–80% vs manual change.

What VOC abatement do you recommend for a 20,000 m³/h booth?

For continuous operation at 20,000 m³/h, a Regenerative Thermal Oxidizer (RTO) with 95%+ heat recovery is optimal. Destruction efficiency 99%+, operating cost minimized by heat recovery. Capex higher than recuperative but 3–5 year payback typical. For batch operations or lower volumes (<10,000 m³/h), recuperative oxidizer or carbon adsorption may be more economical.

Can you integrate with our existing paint kitchen and colour management system?

Yes. Dade's paint cell controllers (PLC-based) communicate via Ethernet/IP, Profinet, Modbus TCP, or OPC UA with paint kitchen PLCs, colour management software (e.g., PPG, Axalta, BASF systems), and MES/ERP. Recipe download, colour change sequencing, and consumption reporting all integrated.

What certifications do your paint cells carry?

All cells: CE Machinery Directive 2006/42/EC, ATEX 2014/34/EU (Zone 1), NFPA 33 (US), OSHA 1910.107. Optional: INMETRO (Brazil), KCs (Korea), CNEx (China), SASO (Saudi). Paint kitchen: NFPA 30/33, FM Global. Documentation package includes risk assessment, conformity declaration, and test reports.

Request a Painting & Coating Quotation

Send part drawings, coating specs (primer/base/clear, DFT targets), annual volume, colour count, substrate material, and local VOC regulations. Technical quotations within 5–10 business days for complete RFQ packages.

Send Inquiry Now
HOME APPLICATION APPLICATION tel NAVIGATION