Technical Data of Vibration Exciter Welder
Three-phase AC power supply: 380V (±10%), 50Hz
Single-phase AC power supply: 220V (±10%), 50Hz
Ambient temperature: -20°C to 45°C
Humidity: 50% to 90%
Compressed air: 0.5MPa to 0.7MPa
Key Features of Vibration Exciter Welding Device
Welding method: Rich argon gas-shielded arc welding (80% Ar + 20% CO₂)
Welding position: Flat welding (fillet welding in the horizontal position), horizontal fillet welding
Welding wire: 1.2mm solid wire
Wire extension length: 22mm
Welding oscillation width: 0–30mm
Working Principle of Vibration Welding System
Workpiece name: Vibration exciter
Workpiece specifications: Maximum weight 161kg
Weld seam type: As per the weld requirements indicated in the customer's product drawings
Work Process of Automatic Welding and Assembly Line
Process Flow
1)Impact-type vibration exciter process flow:
Single-part machining → Complete assembly → Complete welding
2)Non-impact-type vibration exciter process flow:
Single-part machining → Internal rib plate assembly and welding → Complete assembly → Complete welding
Production Line Requirements:
Use a power-assisted robotic arm to lift single parts (eccentric blocks, central shafts, etc.) onto the assembly fixture. The supplier must design suitable lifting tools to facilitate the handling of components and finished products. The lifted parts must remain level, saving time and effort while ensuring easy assembly.
After manual assembly, tacking, and welding (internal welds) on the fixture, the workpiece is automatically transported to the conveyor line.
The workpiece is then automatically transferred to the welding positioner, which clamps it automatically and rotates to the desired angle (360°adjustable). The welding robot performs automatic welding.
After welding, the positioner moves to the manual grinding area, where workers grind the workpiece while the positioner rotates and tilts for full accessibility.
Once grinding is complete, the positioner moves to the output line, releases the workpiece automatically, and a power-assisted arm lifts it onto the material storage rack.
The production line design must consider the placement of materials at each stage to facilitate easy handling.
1.Usage Environment:
Three-phase AC power supply: 380V (±10%), 50Hz
Single-phase AC power supply: 220V (±10%), 50Hz
Ambient temperature: -20°C to 45°C
Humidity: 50% to 90%
Compressed air: 0.5MPa to 0.7MPa
2.Welding Conditions:
Welding method: Rich argon gas-shielded arc welding (80% Ar + 20% CO₂)
Welding position: Flat welding (fillet welding in the horizontal position), horizontal fillet welding
Welding wire: 1.2mm solid wire
Wire extension length: 22mm
Welding oscillation width: 0–30mm
3.Applicable Workpieces:
Workpiece name: Vibration exciter
Workpiece specifications: Maximum weight 161kg
Weld seam type: As per the weld requirements indicated in the customer's product drawings
The placement status of materials during each process is as follows:
